Before applying the epoxy concrete floor coating a second stripper is applied to help remove contaminants and to give the concrete a sandpaper like texture. A rotary scrubber is used to help remove any mineral stains still on the cement. As in the previous step, the mixture is then vacuumed up completely, making sure that everything is removed the cracks of the floor.
Your next step in the epoxy concrete floor coating project is to flood the floor with clean water and make sure to rinse all the debris away from the corners and around anything that is fixed to the floor. The scrub the floor again with the rotary scrubber until there is no more suds released from the floor. Then, like in the previous steps, the solution is vacuumed including the cracks in the floor. When this is done, you will repeat this step in exactly the same manner.
The first coat of the epoxy concrete floor coating is applied with rollers and a large paintbrush for any detailing work. Tape off any doorways and under garage doors. Sealers have a strong odor, so proper ventilation is a good idea. Make sure the weather is conducive to the coating hardening, below fifty-five degrees and it will not harden. Wait about five or six hours to apply the second coat.
Your next step in the epoxy concrete floor coating project is to flood the floor with clean water and make sure to rinse all the debris away from the corners and around anything that is fixed to the floor. The scrub the floor again with the rotary scrubber until there is no more suds released from the floor. Then, like in the previous steps, the solution is vacuumed including the cracks in the floor. When this is done, you will repeat this step in exactly the same manner.
The first coat of the epoxy concrete floor coating is applied with rollers and a large paintbrush for any detailing work. Tape off any doorways and under garage doors. Sealers have a strong odor, so proper ventilation is a good idea. Make sure the weather is conducive to the coating hardening, below fifty-five degrees and it will not harden. Wait about five or six hours to apply the second coat.
For more information contact us:
Visit: www.ecc-crete.com
Phone: 587-402-3635
Email: info@ecc-crete.com
No comments:
Post a Comment